How to Build a Gravel Path in Your Garden in 8 impressive processes

How to Build a Gravel Path in Your Garden

Your garden welcoming with a beautiful gravel path that symbolizes easy wandering for regular laborers inside the yard. Well, these pathways definitely create a certain type of mood that people seem to enjoy. And why not? Gravel paths are a great solution for a fantastic planting frame plus some amazing viewpoints.

But with that being said, creating an easy access specific gravel path is not something you say and happens. There’s a need for proper planning, right implementing of those plans, and working gradually with correct guidelines towards the beautiful outcome.

And to make that happen, let’s talk thoroughly about how to build a gravel path.

How to Build a Gravel Path in Your Garden That Suits Your Garden’s

Overall Vibe?

How to Build a Gravel Path in Your Garden

Depending on your garden style, there’s a lot of consideration during the planning phase before constructing the path. However, the cobblestone curb styled paths work best with most garden settings. Let’s talk about the entire process of making it but first…

Here’s Why A GRAVEL Path is Important to Have in Your Yard.

A gravel path is not just meant to enhance the beauty of your yard. It has some serious benefits including the looks.

First of all, the path will help in creating some guide for wandering without getting lost inside your garden. With a nice path, you can also sidestep any risk of getting your feet muddy. The cost to make these paths are also relatively less. You can enjoy a helpful drainage system for the wet season downpours as well.

Some path surfaces will end up being covered with algae causing a high chance of slipping on them. But with a gravel path, you avoid such problems too. The only downside that you should be aware of the gravel path, is its sinking into dirt issue. With pasting time, the path will start sinking into grime and at one point become absolutely gone. However, if during the making phase, you add some extra steps to increase layers, this problem can be sorted out.

You may also read:

  1.  how to build a lean to shelter
  2. how to plant blueberry bushes

8 essential processes which are  must know to build a gravel path  given below:

1. Start with Planning
2. Get These Tools
3. Making the Edging Trench
4. Go for the Bed.
5. Support the Edging
6. Get Rid of Grass & Soil.
7. Soil Firming
8 Use a Weed Membrane.

1. Start with Planning.

You want to have some guidance on where you’ll need to work. So, the best starting format is by drawing the proposed route. Use any string or even marking paint to do so. You can go for both straight and curving shapes. And that’ll depend on what type of outcome you want.

Also, its best to draw the route a few days prior to the actual process. That way you can have some thoughts after living with the route’s outline and be even sure about it. Try to check it from an upstairs window of your house.

With gravel, there’s a huge chance of looking unsightly if not done in the right way. The best way is by sticking to keep gravel in its place. In most cases, the simple timber gravel boards provide a great result to overcome this issue.

You need to nail some pegs made from wood by maintaining one-meter intervals. Also, by going for decorative edges, you get to enjoy both functionalities as well as looks.

Also, if you are planning to make a gravel path between the gate and front door, consider the fact that it will be heavily used. So, make sure you go with a firm and even base. It needs to be wide enough that at least two people can easily go through.

Also, to make it practical, consider something wide enough for a pram or even wheelchair passing. If you want some attention to gain towards those secluded bench areas or hidden spots, try for a grave path plan that wanders around flower beds.

2. Get These Tools.

You are ready with your plan. Time to get some stuff that you’ll need for the process. Grab a steel tape, a spirit level, sharp spade, concrete, rake, mortar, string, and brick trowel. You may also need some hardcore. Your gravel needs to be the necessary amount as well. Usually, for every square meter, it’s best to use at least 40 kg of gravel or decorative aggregate.

3. Making the Edging Trench.

You need to determine the height of edging first. Then have a look at the type of soil you have in your garden. The difference between the path and top of edging is known as upstand, which is another factor you need to consider. These are going to be your deciding factors for how deep the trench needs to be.

You need to compact the base. Use the rake’s head part to do so. Now on the trench’s bottom part, you need to lay a 10-centimeter-deep concrete foundation next. Then to smooth it out evenly, use a trowel. You also want to have a continuous eye on the levels.

4. Go for the Bed.

As soon as you are done with setting concrete, get a string line. This will help you to guide the edging’s top once you fix it up. To guide the front edge, you need to go for a second line as well. Now to bed the edging stones, you should use mortar. Make sure to spread an even layer of mortar here. There’s also a need of maintaining a gap of 3 to 4 millimeters between.

With this setup, there’s a chance of damage if rain starts to pour or it becomes too dry. You can use some plastic sheeting to sidestep such risks easily.

5. Support the Edging.

The mortar will need a day or so for completely setting up. Next, you need to use concrete for edging support. Considering up to two-thirds of height, you need to carry this out right behind the stones. You can use a trowel to create some help for drainage. From the edging, just slope concrete slightly away. As soon as the soil reinstates, there will be no haunch in attention.

6. Get Rid of Grass & Soil.

You need to give the edging sufficient time to dry up nicely. Then to tackle the pack remove soil and grass. You should remove the 10 to 15-centimeter-deep surface. This will depend on the condition of your soil though.

If you previously had a gravel path, there are chances of finding the remains in this step. Also, make sure to get rid of all vegetation here. Or else there is a risk of unevenness as well as rotting.

7. Soil Firming.

If the path you are going for is narrow, then use a rake head or a solid wood piece to firm soil. A garden roller can help in the case of larger paths. You can even hire some vibrating plates for this step. If you notice that the subsoil is a bit soft, use hardcore. You can add a few inches of hardcore to let it compact again. Take your time to evenly level the gravel. This will stop the hardcore from working to the surface while settling ground.

8 Use a Weed Membrane.

You need to use a piece of caret or even the permeable membrane layer will work. This will help in passing rain through it. However, it will also make sure that the soil below stays separate from gravel. You can then spread your choice of gravel using a rake by maintaining a depth of two or three centimeters.

How to Build a Gravel Path in Your Garden


And that’s how to build a gravel path all by yourself. It’s surely one simple but effective solution to keep foot traffic under control plus directed right. The path will definitely discourage people to walk across the grass that you’re trying to grow.

However, don’t expect the process to be simple and something that could be done in a day. You need to spend enough effort and time for planning, preparing as well as working. The results will definitely make you forget the pain behind, however. So, Give It a Try!

M Jay

Lovers of outdoors, activities, nature, and wild. That’s what we truly are. Here I willing to share our thoughts, experiences, conclusions, events, and more. So that fellow outdoorsy like you can have their spare time spent well.

Recent Posts