Get Insane Deals & Huge Discounts From Amazon on This Prime Day:
Check Deals

How to Clear a Yard Full of Weeds in 6 Essential Steps

A yard taken over by weeds and bushes is no surprise event for garden owners. Also, this can happen pretty quickly. You may leave in relief seeing everything is just right and enter the next moment to realize that your beautiful outdoor yard is now a wild mess. And that’s when being concerned about how to clear a yard full of weeds comes to mind.

Now, this is not a process with a simple step. In fact, its’ something you need to know a lot about before jumping into the actual process. Whether you want to use an herbicide to get quick results or simply follow a safe chemical free but prolonged process, that’s also a matter you’ll need to think about.

So, let’s go for a comprehensive guide that can help you out with all these issues.

How to Clear a Yard Full of Weeds Using a Methodical

Approach.

Before the actual process, let’s introduce you to some observation tips plus a few common weed types to make identifying easy. Without these, you won’t be able to make the right decision on which route will work best for your yard’s condition. So, let’s sort this problem out by understanding one matter at a time.

How to Clear a Yard Full of Weeds

1. It’s Important to First Observe Your Yard with Weeds.

In some cases, folks get really confused by whether the disturbing change they can notice in their yard is actually related to weed or not. So, proper identification of the problem is a must to treat it with right solution. You should be able to notice some trifling thorny leaves. Also, there should be an acerbic taste if its weed. Usually, garden weeds come with tiny flowers. These flowers can be white, purple, or yellow in color.

You also need to determine whether the yard is blown out with weed or not. If the weeds are still at one corner minding a fission state, then cleaning those out will be much less hassling. However, if the yard seems completely covered around these, it’s going to be a bit complicating and hard.

2. Understand Different Types of Lawn Weeds.

Identifying weed will be way easier if you have some background idea about the types that usually take place in yards. The three common types of weeds are what you need to know about for now. One is broadleaf weeds that come with pretty huge but flat leaves. These don’t look like grass at all. The dandelion is a common example of a broadleaf weed that needs removal from yard.

The next type is grassy weeds and these are very deceptive by looks. Initially, you’ll think your yard is normal with growing grass. But at some point, you’ll notice that you have a yard full of weeds no grass. Crabgrass and foxtails are two grassy weed types that are common.

And finally, the grass-like weeds that are quite similar to previous type. The major difference is a tube-like non-flat shape with grass-like weeds. Wild garlic is a common example.

3.Start by Cleaning & Then Mowing.

You have to get rid of the weed clusters first. Use a tiny hand shovel to get rid of these clusters as much as possible. If you plan to just tear the weeds off from surface, then that’s not going to work. The root along with its entire body needs removal.

You should also never leave the pulled weeds on your yard’s surface lying. If you mow over these leftover weeds, it will get chopped. And unintentionally you’ll allow the weeds to replant themselves.

You can use a self-propelled or reel mower next. The electric cordless lawn mower will work even better. Set the blade to its highest setting for mowing your yard next. With tall, thick, and vigorous grass, there will be no problem with weeds to mow efficiently.

4.Using Weed Killer & Aerating the Lawn.

You have to use a sprayer for applying the weed killer. This way the weeds will have direct contact with killer. You should avoid the grasses that are growing healthily while spraying. Or else herbicides can severely damage the growth of good grasses. Before you set up a new lawn, try to take some time for spraying in this way at least three weeks earlier.

You can either use your hand or power tools to correctly aerate your land. You can push a tube into the surface. Then leave with an open hole and at the same time move out those small soil plugs. Once you are done with forming this loose soil, the grassroots will start growing deeper in ground. It will also enhance the quick and deep penetration of fertilizer as well as water.

If you are using a turf aerator, go from one end of your yard to another gradually. You want to start with a horizontal direction. Then proceed by going diagonally from a corner to its opposite one. This way you will ensure the air is reaching deepest grassroots. In lawns that go through high traffic, this solution works best. Especially the ones that have clays in a large amount.

5.Panting Need Seeds of Grass.

Now you need to plan for establishing a new lawn. Here use new and weed-free seeds. You also want to lift the thatch using a power rake. Make sure to break the aerator plugs up as well. And then loosen the soil nicely.

You also want to go over the yard form both directions. Get rid of the dead debris and then allow seeds to contact your yard’s soil. Use a broadcast spreader for an even distribution of the right amount of seeds. For every square inch, you should use around fifteen seeds approximately.

How to Clear a Yard Full of Weeds

6.Watering & Fertilizing.

You should water the new grass at least twice every week. Usually, morning time is best for watering during summer days. Depending on the type of grass and soil as well as climate, you will need different watering regimes to follow.

A great test to find the right regime is by using a screwdriver. Simply push a screwdriver into the soil at least 6 inches deep. If it is moist, then less watering is okay. However, if grayish and rolling leaf blades come out then the land must be dry and needs more watering.

You also need to dry down your lawn to use some weed killing fertilizer on new grass. The lawn fertilizers that include phosphorus, potassium and nitrogen work best for grass development. Go for fertilizers that come with the “New Lawns” label.

Wrap-up

And that was all about how to clear a yard full of weeds. You probably have a clear concept about the ins and outs of weed clearing from a yard. When using chemicals, materials, and tools in your lawn, be enough knowledgeable and wise with taking decisions. You should never try experimenting with some unknown formula here. This can cause severe damage to your haven yard turning it into a disaster. So, Pay Attention to Following the Right Known Solutions.

Leave a Comment

shares